#611# "Please press button next to the key for registration."
#612# "You do not get a message after registration!"
#613# "Registration is disabled in Demo version!"
#1000# "Less Options <<"
#1001# "More Options >>"
#1002# "Resize Modus off - ( To turn on: "
#1003# "Color"
#1004# "Contrast"
#1005# "Flickerfilter"
#1006# "Volume"
#1007# "Brightness"
#1008# "Enhance Text"
#1009# "Non-Interlaced"
#1010# "Dot Crawl Reduction"
#1011# "Cross Color Filter"
#1012# "Color Fix"
#1013# "TVTool - Play on TV"
///// Here starts the message box texts. //////
#2000# "You are not in TV Mode!"
#2001# "All adjustments are set to default values!"
#2002# "Do you really want to change the TV system?"
#2003# "Your Monitor must be able to handle low frequencies (PAL 50Hz/31kHz - NTSC 60Hz/31kHz) to use dualview. Otherwise it could be damaged.\\Do you want to turn this option on?"
#2004# "This mode is not initialized yet.\\Do you want to initialize it now and restart the computer?"
#2005# "No window is selected!\\ To select a window bring it in foreground first and press the hotkey."
#2006# "none"
#2007# "This resolution is not initialized yet. Please refer to the help file to get this mode initialized."
#2008# "This resolution is not initialized yet. Please refer to the help file to get this mode initialized.\\Note: The resolution 720x480 provides best quality in NTSC. It is strongly recommended to use this resolution for movie playback!"
#2009# "Do you really want to change the TV mode resolution?"
#2010# "You have turned on TV mode in the display driver settings!\\To turn TV mode off please disable it in the display properties."
#2011# "There was no supported graphics card found in your system!\\TVTool supports graphics cards based on nVidia chipsets only."
#2012# "TVTool was unable to detect a TV chip on your card. Please have a look in the FAQ to solve this problem!"
#2013# "TVTool was unable to detect a TV chip on your card!\\You have more than one graphics adapters in your system. Please make sure that the card containing the TV-out is the primary graphics card. This can be set in the bios of your PC."
#2014# "TVTool was unable to start the NT service. You must have administrator rights for the first installation of TVTool!"
#2015# "The shareware version of TVTool has a time limit of 15 minutes each session. Thank you for evaluating this program.\\Please visit the homepage for further information."
#2016# "The combination ALT-F6 is not available under this operating system. Please chose another hotkey!"
#2017# "There seems to be a problem with your user data.\\Please contact support@tvtool.de for further assistance!"
#2018# "TVTool has detected a graphics card change since last session.\\Picture parameters are set to their default values!"
#2019# "This is the first time you run this version of TVTool.\\The hotkey definitions and picture parameters are set to default!"
#2020# "The PC will be shut down in 1 minute. All open applications are concluded.\\To stop the timer please press the Cancel button."
#2021# "The switch could not be performed.\\Please try another TV mode resolution."
#2022# "The change will become active after next start of TVTool!"
#2023# "This beta version is expired! Please upgrade to the final realease at www.tvtool.de."
#2024# "TVTool has detected that TwinView is enabled. It is strongly recommended to disable nView before using TVTool!\\Please set TwinView to standard mode in the display properties!"
#2025# "Please select application"
#2026# "Please select location of mplayer2.exe"
#2027# "The PC will be shut down shortly!\To stop press Cancel button."
#2028# "The playback starts in 30 sec.\To stop press Cancel button"
#2029# "The settings have been saved to your TVTool folder!"
#2030# "The settings are restored!\\TVTool will be quit now and the settings become active after next start."
#2031# "The backup file was not found in your TVTool folder!"
#2032# "TVTool cannot enable TV mode while you are in TFT only mode. Please enable TV mode in the display properties!\\If you want to switch to TV mode with TVTool a monitor dummy is required. Please check out the FAQ for further information."
#2033# "Please wait while searching hardware ..."
#2034# "This mode requires special wiring.\\Do you want to turn it on?"
#2035# "TVTool has detected a DVI TFT display. Unfortunately this configuration is not supported yet by TVTool for GF2-MX and GF4 cards!\\TVTool can be used only if the TFT display is connected to the standard analog VGA output."
#2036# "The current resolution is smaller than the reference resolution. Therefore some icons might be placed incorrectly!\\Do you really want to restore the icons?"
#2037# "Do you really want to save the icon positions and overwrite current setting?"
///// These are the TVTool context menu entries. //////
